Onkyo Announces Two 3D-compatible AV Receivers

Home

Onkyo Announces Two 3D-compatible AV Receivers

Posted June 30, 2010 05:51 AM by Juan Calonge

Onkyo has announced two new high-end, 3D-compatible network A/V receivers with HDMI 1.4a, models TX-NR3008 and TX-NR5008. Both receivers support network audio streaming, various multi-room set-ups, and iPhone/iPod playback over USB. Both have achieved THX Ultra2 Plus certification. They will be available in August. List prices are $2,099 for the TX-NR3008 and $2,699 for the TX-NR5008.

Main features for both models include:
  • Eight HDMI® 1.4a inputs, with compatibility specified for an Audio Return Channel and 3D video, and support for both mandatory video formats for 3D broadcasting ("Side-By-Side (Half)" and "Top-and-Bottom")
  • Dual HDMI outputs, allowing users to connect two high-definition displays simultaneously.
  • HQV-Reon VX video processor
  • 1080p upscaling of all video inputs, regardless of source resolution
  • Advanced ISF video calibration, which allows users to make fine-grained, independent adjustments for each video source.
  • Audio networking
  • Internet radio
  • Rear-side Ethernet port for firmware upgrades and direct connection to the internet or to a home PC. Users can access streaming internet radio through Pandora, Rhapsody, Napster, Slacker, Sirius Internet Radio, and vTuner, or play back a wide variety of PC-based audio files, including FLAC, MP3, WAV, Ogg Vorbis, WMA, WMA Lossless, AAC, and LPCM.
  • Windows 7 compatible
  • DLNA 1.5 certified
  • 9.2 audio channels
  • Audyssey DSX (adds extra height or width channels for greater spatial ambience) and Dolby Pro Logic (provides the option of extra height channels)
  • Dolby TrueHD and DTS-HD Master Audio
  • Compatibility with DSD Direct
  • Burr-Brown DACs
  • Audyssey room-correction and equalization
  • Flexibility in multi-room set-ups: the TX-NR5008 and TX-NR3008 let users play a 5.1-channel source in the main room, along with fully powered stereo audio of two different sources in Zone 2 and Zone 3. On top of that, users also have the option of Zone 2/3 pre outs and Zone 2 video output.
  • Music playback and album art display from USB port
  • Gold-plated audio inputs
  • PLL jitter-cleaning circuit technology on all models
  • Separate transformers for audio and video processing
  • Analog RGB input for video content from a connected PC
  • Backlit and customizable remote controller
  • HDMI Thru: allows children to still watch programs when the receiver is not turned on
  • Onkyo's new overlaid graphical OSD for seamless adjustment of settings during a viewing session
The TX-NR5008 adds a second USB port at the rear, and a "massive" toroidal transformer and 22,000 ìF capacitors.